Skip to main content

Replicating Fedora Machines using Kickstart

Sometimes one wants to install more machines the same as one that is already working.  Replication is one point where Linux is light years ahead of the competition.

Using Kickstart, you can roll out thousands of identically configured machines (with hardware that may be completely different) in a jiffy - Kickstart will automatically install the correct device drivers.

The Skinny

I usually do it manually, since it is too simple to bother scripting:
  • Save file /root/anaconda-ks.cfg
  • Save /etc/yum.repos.d with tar -zcvf yum.repos.d.tgz /etc/yum.repos.d
  • Save the packages list with yum list installed > packages
Use the saved kickstart file to install the new machine, untar the repos and run yum -y install $(cat packages) or yum -y install < packages

Booting Kickstart

Kickstart is the remote control system of the Red Hat Anaconda installer.

A Kickstart installation requires access to the Linux installation media on a local CD-ROM drive or hard drive, or over the network using HTTP or NFS.

If you need just one or two new machines, then do it manually.  If you need hundreds or thousands, then it is worth modifying the Kickstart file to make installation completely hands free.

To use a Kickstart file to install a system:
  1. Boot the system from a Live CD or USB schtick. If you need to modify the boot command, press Esc to access the command line.
  2. If you have not customized the boot medium to use Kickstart, use the ks option to specify the location of the Kickstart file.

    For example, the following boot command specifies that the Kickstart file is on the boot CD:
    boot: linux ks=cdrom:/ks.cfg
    If the Kickstart file is located on an NFS server, you might use a boot command such as the following:
    boot: linux ksdevice=em1 ip=dhcp ks=nfs:192.168.1.100:/ksfiles/ks.cfg
    where ksdevice=em1 specifies the network interface and ip=dhcp specifies that DHCP should be used to configure this interface.
That is all there is to Kickstart - it works.

Synchronizing Two Machines

If you have two existing machines and you want to ensure that they have the same packages installed, then you can use dnf or yum:

Get the list of installed packages on one machine (sort, just makes it nice):
$ rpm -qa --qf "%{name}.%{arch}\n" | sort > packages.lst
Install missing packages from the list on the other machine:
$ sudo dnf install $(cat packages.lst)

Do it both ways and they will end up the exact same.


La Voila!
    Labels:

    Comments

    1. AnonymousFebruary 23, 2015 at 5:06 PM

      Hi Herman,
      I'm here cuz you mentioned that kickstart was a way to save a particular build of linux to install easily later on. I'm stuck at the "Boot the system from a USB schtick". I've got a live USB and when I get to the boot screen I have the options: Start Fedora, Test this media and Start Fedora, Troubleshooting >. If I press e to edit an option it seems the boot: command is not recognized. I'm sure I'm missing something simple here. Any thoughts?

      ReplyDelete
    2. Herman J.H. OosthuysenFebruary 23, 2015 at 5:19 PM

      That is the most difficult part. It could require a bit of faffing around till you figure out exactly when to press the esc key unfortunately!

      https://docs.fedoraproject.org/en-US/Fedora/20/html/Installation_Guide/ap-admin-options.html

      https://docs.fedoraproject.org/en-US/Fedora/20/html/Installation_Guide/s1-kickstart2-startinginstall.html

      ReplyDelete

    Post a Comment

    On topic comments are welcome. Junk will be deleted.

    Popular posts from this blog

    OpenEMS with Octave and SciLAB

    I wanted to do some advanced RF antenna development work and needed an electromagnetic field solver that is a bit more up to date than NEC2 .  Commercial solvers from Matlab , Ansys and others are hideously expensive (in the order of $20,000 to $50,000) and do not fit in the wallet of a hobbyist or a small consulting company.  Recently, openEMS became available and it fills the niche with a capable free tool.  In general, openEMS is a solver - a Finite-Difference Time-Domain (FDTD) numerical engine.  You interact with it through Octave , which is almost identical to Matlab .  You can watch a good video by Thorsten Liebig here: https://www.youtube.com/watch?app=desktop&v=ThMLf0d5gaE   Getting it to work is a little painful, but it is free, so bear with it - then save a backup clone, or a zipped copy of the whole virtual machine directory and NEVER update it, to ensure that it keeps going and doesn't get broken by future updates, right when you are ...
    Post a Comment
    Read more

    Parasitic Quadrifilar Helical Antenna

    This article was reprinted in OSCAR News, March 2018:  http://www.amsat-uk.org If you want to receive Satellite Weather Pictures , then you need a decent antenna, otherwise you will receive more noise than picture. For polar orbit satellites, one needs an antenna with a mushroom shaped radiation pattern .  It needs to have strong gain towards the horizon where the satellites are distant, less gain upwards where they are close and as little as possible downwards, which would be wasted and a source of noise.  Most satellites are spin stabilized and therefore the antenna also needs circular polarization, otherwise the received signal will flutter as the antennas rotate through nulls. The helical antenna, first proposed by Kraus in 1948, is the natural solution to circular polarized satellite communications.  It is a simple twisted wire - there seems to be nothing to it.  Various papers have been published on helix antennas, so the operation is pretty well ...
    3 comments
    Read more

    Yagi Antenna for 900 MHz ISM Band

    I like tinkering with wire antenna designs, since they are simple and cheap to make.  Mr Yagi invented his antenna about 100 years ago, but there are still some things left to learn about it. 900 MHz ISM Band Yagi The 900 MHz ISM band ranges from 902 to 928 MHz.  Covering the whole band with a single Yagi antenna is difficult, since they are inherently narrow band devices.  Consequently some tweaking is required and the result below is a desensitized design that can be built and replicated quite easily, but you need a network analyzer - "To Measure, is to Know!" A Yagi generally consists of a Reflector, Radiator and one or more Director elements, arranged on a boom.  For a small Yagi, a wooden ruler works a treat, since one can easily mark the position of the wires.  The wire elements are fastened to the bottom of the ruler with hot glue.  The wire elements are  made from straightened out jumbo size paper clips.  The balun, is tw...
    Post a Comment
    Read more