Skip to main content

ArduPlane Mission Planner Installation

I love it when a plane comes together...

Getting the ArduPlane autopilot installed in a plane is quite intricate and getting the Mission Planner software to work is also an adventure all by itself, hence this little guide.


The Mission Planner software is a legacy 'Java' application created with the Microsoft DotNet toolkit.

Assuming that you have a real computer - Linux or Mac - you would need a virtualizer to run some version of Windows.  I always use Windows XP for virtual machines, since I own about a dozen useless licenses for it and it is light and fast on a VM.

First get Virtualbox from Oracle for your machine

Make a VM and install your favourite least hated version of Windows, then select Guest Additions from the Devices menu and install it in Windows, then restart the VM.  Your screen should now resize and the mouse and copy/paste buffer should work transparently with UNIX.


Getting DotNet installed on XP is not easy.  Download the following from Microsoft:

  • MSI installer.
  • Dotnet Framework 2, 3, 3.5 and 4.

Reboot umpteen times - at least booting is very fast on a VM.


The FTDI installer may be in a zip file.

Reboot umpteen times again - the pleasure of the Windows user experience.

I machined a neat hole in the fuselage under the wing, opposite the AP USB connector with a Dremel, so that I can plug the computer in without hassle.  Then I remembered to add some foam tape under the AP to isolate the accelerometers from the engine vibration and had to make the hole bigger - sigh.

Mission Planner

Finally, you can install Mission Planner from

Be sure that the motor is switched OFF when you plug the USB cord in, since USB will power up the AP electronics for you and if the transmitter is off, depending on what else you got plugged in, then the motor may start up at full speed unexpectedly.  There is a safety diode in the AP to prevent it from powering the receiver and servos, but I don't know how you wired your things up.

La voila!

Next up - smoke test...



Popular posts from this blog

Parasitic Quadrifilar Helical Antenna

This article was reprinted in OSCAR News, March 2018: If you want to receive Satellite Weather Pictures , then you need a decent antenna, otherwise you will receive more noise than picture. For polar orbit satellites, one needs an antenna with a mushroom shaped radiation pattern .  It needs to have strong gain towards the horizon where the satellites are distant, less gain upwards where they are close and as little as possible downwards, which would be wasted and a source of noise.  Most satellites are spin stabilized and therefore the antenna also needs circular polarization, otherwise the received signal will flutter as the antennas rotate through nulls. The helical antenna, first proposed by Kraus in 1948, is the natural solution to circular polarized satellite communications.  It is a simple twisted wire - there seems to be nothing to it.  Various papers have been published on helix antennas, so the operation is pretty well understood. Therefore,

Weather Satellite Turnstile Antennas for the 2 meter Band

NEC2, 2 m band, 146 MHz, Yagi Turnstile Simulation and Build This article describes a Turnstile Antenna for the 2 meter band, 146 MHz amateur satcom, 137 MHz NOAA and Russian Meteor weather satellites.  Weather satellite reception is described here .  A quadrifilar helical antenna is described here .   Engineering, is the art of making what you need,  from what you can get. Radiation Pattern of the Three Element Yagi-Uda Antenna Once one combine and cross two Yagis, the pattern becomes distinctly twisted. The right hand polarization actually becomes visible in the radiation pattern plot, which I found really cool. Radiation Pattern of Six Element Turnstile Antenna Only a true RF Geek can appreciate the twisted invisible inner beauty of a herring bone antenna... Six Element Turnstile Antenna Essentially, it is three crosses on a stick.  The driven elements are broken in the middle at the drive points.  The other elements can go straight throug

To C or not to C, That is the Question

As most would know, the Kernighan and Ritchie C Programming Language is an improved version of B, which is a simplified version of BCPL, which is derived from ALGOL, which is the Ur computer language that started the whole madness, when Adam needed an operating system for his Abacus, to count Eve's apples in the garden of Eden in Iraq.  The result is that C is my favourite, most hated computer language , which I use for everything. At university, I learned FORTRAN with punch cards on a Sperry-Univac, in order to run SPICE, to simulate an operational amplifier.  Computers rapidly lost their glamour after that era! Nobody taught me C.  I bought the book and figured it out myself. Over time, I wrote a couple of assemblers, a linker-locator, various low level debuggers and schedulers and I even fixed a bug in a C compiler - not because I wanted to, but because I had to, to get the job done!   Much of my software work was down in the weeds with DSP and radio modems ( Synchronization,