Skip to main content

Compile The Latest ffplay From Source

Compile latest version of ffplay from source

Note that this script doesn't overwrite the existing ffmpeg installation:
https://trac.ffmpeg.org/wiki/CompilationGuide/Centos

The gotcha in the above guide is the SDL-devel package without which ffplay will not build.

#! /bin/bash
yum install autoconf automake cmake freetype-devel gcc gcc-c++ git libtool make mercurial nasm pkgconfig zlib-devel SDL-devel


mkdir ~/ffmpeg_sources


cd ~/ffmpeg_sources
git clone --depth 1 git://github.com/yasm/yasm.git
cd yasm
autoreconf -fiv
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin"
make
make install
make distclean


cd ~/ffmpeg_sources
git clone --depth 1 git://git.videolan.org/x264
cd x264
PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static
make
make install
make distclean


cd ~/ffmpeg_sources
hg clone https://bitbucket.org/multicoreware/x265
cd ~/ffmpeg_sources/x265/build/linux
cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source
make
make install


cd ~/ffmpeg_sources
git clone --depth 1 git://source.ffmpeg.org/ffmpeg
cd ffmpeg
PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure --prefix="$HOME/ffmpeg_build" --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin" --pkg-config-flags="--static" --enable-gpl --enable-libx264 --enable-libx265 --enable-ffplay
make
make install


cd /usr/lib
ln -s /home/username/bin/ffplay fffplay

Play Video With Low Latency Using ffplay

This is the fastest I can make ffplay:

$ ffplay -threads 2 -flags low_delay -fflags nobuffer -rtbufsize 32768 -fast -probesize 800000 -analyzeduration 800000 -ss 1 -framerate 50 udp://224.0.1.6:2006


Play Video With ffmpeg

This also quite fast, just to show that you can play video directly with ffmpeg using SDL output:

$ ffmpeg -i udp://224.0.1.6:2006 -f sdl -


Play Video With gstreamer

Just because it also pertains to playing video, here are a couple tricks with gstreamer:

$ gst-launch -v playbin uri=udp://224.0.1.6:2006

First try a video test pattern though:

$ gst-launch-0.10 videotestsrc ! ffmpegcolorspace ! autovideosink

If the test pattern doesn't work, then there is no point in continuing - you got to fix it.

La Voila!

Herman
Labels:

Comments

  1. UnknownNovember 29, 2015 at 9:17 AM

    When I want to play video with FFMPEG, I get this error:

    Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/storage/external_storage/sda1/1.mp4':
    Metadata:
    major_brand : isom
    minor_version : 512
    compatible_brands: isomiso2avc1mp41
    encoder : Lavf54.29.104
    Duration: 00:03:44.45, start: 0.000000, bitrate: 4130 kb/s
    Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1920x1080
    , 3869 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc (default)
    Metadata:
    handler_name : VideoHandler
    Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 25
    6 kb/s (default)
    Metadata:
    handler_name : SoundHandler
    ←[1;35m[NULL @ 0xb8100c20] ←[0m←[1;31mRequested output format 'sdl' is not a sui
    table output format
    ←[0m←[1;31mpipe:: Invalid argument

    ReplyDelete
  2. Herman J.H. OosthuysenNovember 29, 2015 at 3:40 PM

    Could you please post your exact command?

    I am thinking that you either have a spelling mistake in the command, or the SDL package is not installed.

    ReplyDelete

Post a Comment

On topic comments are welcome. Junk will be deleted.

Popular posts from this blog

OpenEMS with Octave and SciLAB

I wanted to do some advanced RF antenna development work and needed an electromagnetic field solver that is a bit more up to date than NEC2 .  Commercial solvers from Matlab , Ansys and others are hideously expensive (in the order of $20,000 to $50,000) and do not fit in the wallet of a hobbyist or a small consulting company.  Recently, openEMS became available and it fills the niche with a capable free tool.  In general, openEMS is a solver - a Finite-Difference Time-Domain (FDTD) numerical engine.  You interact with it through Octave , which is almost identical to Matlab .  You can watch a good video by Thorsten Liebig here: https://www.youtube.com/watch?app=desktop&v=ThMLf0d5gaE   Getting it to work is a little painful, but it is free, so bear with it - then save a backup clone, or a zipped copy of the whole virtual machine directory and NEVER update it, to ensure that it keeps going and doesn't get broken by future updates, right when you are ...
Post a Comment
Read more

Parasitic Quadrifilar Helical Antenna

This article was reprinted in OSCAR News, March 2018:  http://www.amsat-uk.org If you want to receive Satellite Weather Pictures , then you need a decent antenna, otherwise you will receive more noise than picture. For polar orbit satellites, one needs an antenna with a mushroom shaped radiation pattern .  It needs to have strong gain towards the horizon where the satellites are distant, less gain upwards where they are close and as little as possible downwards, which would be wasted and a source of noise.  Most satellites are spin stabilized and therefore the antenna also needs circular polarization, otherwise the received signal will flutter as the antennas rotate through nulls. The helical antenna, first proposed by Kraus in 1948, is the natural solution to circular polarized satellite communications.  It is a simple twisted wire - there seems to be nothing to it.  Various papers have been published on helix antennas, so the operation is pretty well ...
3 comments
Read more

Yagi Antenna for 900 MHz ISM Band

I like tinkering with wire antenna designs, since they are simple and cheap to make.  Mr Yagi invented his antenna about 100 years ago, but there are still some things left to learn about it. 900 MHz ISM Band Yagi The 900 MHz ISM band ranges from 902 to 928 MHz.  Covering the whole band with a single Yagi antenna is difficult, since they are inherently narrow band devices.  Consequently some tweaking is required and the result below is a desensitized design that can be built and replicated quite easily, but you need a network analyzer - "To Measure, is to Know!" A Yagi generally consists of a Reflector, Radiator and one or more Director elements, arranged on a boom.  For a small Yagi, a wooden ruler works a treat, since one can easily mark the position of the wires.  The wire elements are fastened to the bottom of the ruler with hot glue.  The wire elements are  made from straightened out jumbo size paper clips.  The balun, is tw...
Post a Comment
Read more