Travel with Computers

I used to think that one is safe against search and seizure of computers and phones at Canadian borders, but no more: http://www.cbc.ca/news/alain-philippon-phone-password-case-powers-of-border-agents-and-police-differ-1.2983841

When I travel to the USA, I upload my encrypted data to a FTP server and take a Kindle with me. The border guards can have fun with that all they like. Now I'll have to do the same when I go home too - ridiculous.

I should be able to enter my own country without being harassed at the border!

I do think that sanity will prevail in the end, but until it does, rather mail/courier your computers and equipment to wherever you are going, or beg/buy/borrow something at your destination and travel light.

It is much the same as travel with medication - take the prescription with you and buy new medicine at your destination - and never, never, never take unidentifiable scary white powders with you. Years ago, we had huge trouble in Paris because of a few tins of baby formula, so the stupidity is everywhere. Vive la difference....

Comments

PCB Mill

PCB Mill Kit My latest toy is a small PCB Mill, a CNC 3018 Pro, there are many available from Ali Express for the enormous sum of 285 Dirhams or so, which is about 70 Euro. I thought that even if it didn't work at all, it would not be a big loss. Assembled CNC 3018 Kit It will help if you have a little previous workshop experience, but these machines are so simple and relatively slow moving, that any radio-geek can safely experiment. Carving With a V-bit in a Puddle of Oil Of course I can have boards made in China by Dirty PCBs , but what is the fun in that? The problem with making PCB antennas, is that you need to experiment to change the design 1 mm this way or that, to tune it just so and just such and having to wait 2 weeks for each experiment doesn't work. A few hours playing with a router is more practical. It turned out to be a pretty nice little kit, made from aluminium and 1/4 inch Bakelite (paper reinforced phenol formaldehyde). This Pre...

Yagi Antenna for 900 MHz ISM Band

I like tinkering with wire antenna designs, since they are simple and cheap to make. Mr Yagi invented his antenna about 100 years ago, but there are still some things left to learn about it. 900 MHz ISM Band Yagi The 900 MHz ISM band ranges from 902 to 928 MHz. Covering the whole band with a single Yagi antenna is difficult, since they are inherently narrow band devices. Consequently some tweaking is required and the result below is a desensitized design that can be built and replicated quite easily, but you need a network analyzer - "To Measure, is to Know!" A Yagi generally consists of a Reflector, Radiator and one or more Director elements, arranged on a boom. For a small Yagi, a wooden ruler works a treat, since one can easily mark the position of the wires. The wire elements are fastened to the bottom of the ruler with hot glue. The wire elements are made from straightened out jumbo size paper clips. The balun, is tw...

OpenEMS with Octave and SciLAB

I wanted to do some advanced RF antenna development work and needed an electromagnetic field solver that is a bit more up to date than NEC2 . Commercial solvers from Matlab , Ansys and others are hideously expensive (in the order of $20,000 to $50,000) and do not fit in the wallet of a hobbyist or a small consulting company. Recently, openEMS became available and it fills the niche with a capable free tool. In general, openEMS is a solver - a Finite-Difference Time-Domain (FDTD) numerical engine. You interact with it through Octave , which is almost identical to Matlab . You can watch a good video by Thorsten Liebig here: https://www.youtube.com/watch?app=desktop&v=ThMLf0d5gaE Getting it to work is a little painful, but it is free, so bear with it - then save a backup clone, or a zipped copy of the whole virtual machine directory and NEVER update it, to ensure that it keeps going and doesn't get broken by future updates, right when you are ...

Aeronetworks sro - Airborne Linux

Search This Blog