Biometric Insecurity

Judge Steven C. Frucci ruled this week that giving police a fingerprint is akin to providing a DNA or handwriting sample or an actual key, which the law permits. A pass code, though, requires the defendant to divulge knowledge, which the law protects against, according to Frucci's written opinion.

This is a very important strike against using Biometrics for security. Use of biometrics for authentication may be OK, but security not. A big problem is that most common users confuse the two.

The problem with using fingerprint or voice biometrics is that you leave samples of it everywhere you go. You leave your prints on glasses and door handles. You leave your voice every time you use a phone and it gets recorded 'for customer satisfaction' reasons. You leave a picture of your face every time you use a bank machine. You leave your DNA whenever you use a hair brush. Any semi-savvy crook can lift it and use it against you and worst of all - You Cannot Ever Change It.

Once someone figured out how to impersonate your biometrics, that person can keep doing so forever and you cannot do anything about it, short of dying before he does.

Nowadays, banks and phone companies are starting to use biometrics for identification and authentication. This is potentially a very bad development.

Comments

PCB Mill

PCB Mill Kit My latest toy is a small PCB Mill, a CNC 3018 Pro, there are many available from Ali Express for the enormous sum of 285 Dirhams or so, which is about 70 Euro. I thought that even if it didn't work at all, it would not be a big loss. Assembled CNC 3018 Kit It will help if you have a little previous workshop experience, but these machines are so simple and relatively slow moving, that any radio-geek can safely experiment. Carving With a V-bit in a Puddle of Oil Of course I can have boards made in China by Dirty PCBs , but what is the fun in that? The problem with making PCB antennas, is that you need to experiment to change the design 1 mm this way or that, to tune it just so and just such and having to wait 2 weeks for each experiment doesn't work. A few hours playing with a router is more practical. It turned out to be a pretty nice little kit, made from aluminium and 1/4 inch Bakelite (paper reinforced phenol formaldehyde). This Pre...

OpenEMS with Octave and SciLAB

I wanted to do some advanced RF antenna development work and needed an electromagnetic field solver that is a bit more up to date than NEC2 . Commercial solvers from Matlab , Ansys and others are hideously expensive (in the order of $20,000 to $50,000) and do not fit in the wallet of a hobbyist or a small consulting company. Recently, openEMS became available and it fills the niche with a capable free tool. In general, openEMS is a solver - a Finite-Difference Time-Domain (FDTD) numerical engine. You interact with it through Octave , which is almost identical to Matlab . You can watch a good video by Thorsten Liebig here: https://www.youtube.com/watch?app=desktop&v=ThMLf0d5gaE Getting it to work is a little painful, but it is free, so bear with it - then save a backup clone, or a zipped copy of the whole virtual machine directory and NEVER update it, to ensure that it keeps going and doesn't get broken by future updates, right when you are ...

Yagi Antenna for 900 MHz ISM Band

I like tinkering with wire antenna designs, since they are simple and cheap to make. Mr Yagi invented his antenna about 100 years ago, but there are still some things left to learn about it. 900 MHz ISM Band Yagi The 900 MHz ISM band ranges from 902 to 928 MHz. Covering the whole band with a single Yagi antenna is difficult, since they are inherently narrow band devices. Consequently some tweaking is required and the result below is a desensitized design that can be built and replicated quite easily, but you need a network analyzer - "To Measure, is to Know!" A Yagi generally consists of a Reflector, Radiator and one or more Director elements, arranged on a boom. For a small Yagi, a wooden ruler works a treat, since one can easily mark the position of the wires. The wire elements are fastened to the bottom of the ruler with hot glue. The wire elements are made from straightened out jumbo size paper clips. The balun, is tw...

Aeronetworks sro - Airborne Linux

Search This Blog