Fedora Linux with Multiple Monitors

Quite annoyingly, a default install of Fedora with XFCE on a laptop computer doesn't support multiple monitors properly. If you plug an external screen in, the only option is to mirror the main screen (using the function keys, fn-F3 or some such), which is seldom what I want. I prefer having a bigger desktop stretched over both screens. Even though the two may not have the same resolution, I think that it is a better use of pixels.

Old Fashioned Setup

Sometimes the prehistorical command line works best. The two screens can be configured with xrandr, but one has to remember to rerun xrandr before the external screen is unplugged, to exclude it (turn it off). It can be made more convenient by hooking two scripts to a pair of hot keys, which would bring your laptop machine back into this century.

First you need to do some sleuthing. Simply run xrandr with no parameters:

$ xrandr

Screen 0: minimum 320 x 200, current 1366 x 1536, maximum 8192 x 8192

VGA-0 connected 1024x768+0+768 (normal left inverted right x axis y axis) 304mm x 228mm

1024x768 74.9* 75.1 70.1 71.8 60.0

832x624 74.6

640x480 72.8 75.0 66.7 60.0

640x400 70.1

LVDS-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm

1366x768 60.0*+

1152x768 59.8

1024x768 59.9

720x480 59.7

640x480 59.4

From this command, you can see that the displays are named LVDS-0 (laptop) at 1366x768 and VGA-0 (monitor) at 1024.768.

Configure the monitor VGA-0, to the right of the laptop screen LVDS-0:

$ xrandr --output VGA-0 --auto --right-of LVDS-0

To disable the external screen before unplugging it:

$ xrandr --output LVDS-0

Graphical Setup

Alternatively, use the graphical utility arandr:
# yum install arandr

Run that utility and click-drag-drop the screens where you want them!

Obstreperous Hardware

Sometimes you encounter weird hardware that hangs the system when X.org tries to probe it. In these cases you need to create an Xorg.conf file and configure things manually. See this link
http://fedoraproject.org/wiki/How_to_create_xorg.conf

'Hope that helps!

Comments

Parasitic Quadrifilar Helical Antenna

This article was reprinted in OSCAR News, March 2018: http://www.amsat-uk.org If you want to receive Satellite Weather Pictures , then you need a decent antenna, otherwise you will receive more noise than picture. For polar orbit satellites, one needs an antenna with a mushroom shaped radiation pattern . It needs to have strong gain towards the horizon where the satellites are distant, less gain upwards where they are close and as little as possible downwards, which would be wasted and a source of noise. Most satellites are spin stabilized and therefore the antenna also needs circular polarization, otherwise the received signal will flutter as the antennas rotate through nulls. The helical antenna, first proposed by Kraus in 1948, is the natural solution to circular polarized satellite communications. It is a simple twisted wire - there seems to be nothing to it. Various papers have been published on helix antennas, so the operation is pretty well understood. Therefore,

To C or not to C, That is the Question

As most would know, the Kernighan and Ritchie C Programming Language is an improved version of B, which is a simplified version of BCPL, which is derived from ALGOL, which is the Ur computer language that started the whole madness, when Adam needed an operating system for his Abacus, to count Eve's apples in the garden of Eden in Iraq. The result is that C is my favourite, most hated computer language , which I use for everything. At university, I learned FORTRAN with punch cards on a Sperry-Univac, in order to run SPICE, to simulate an operational amplifier. Computers rapidly lost their glamour after that era! Nobody taught me C. I bought the book and figured it out myself. Over time, I wrote a couple of assemblers, a linker-locator, various low level debuggers and schedulers and I even fixed a bug in a C compiler - not because I wanted to, but because I had to, to get the job done! Much of my software work was down in the weeds with DSP and radio modems ( Synchronization,

Weather Satellite Turnstile Antennas for the 2 meter Band

NEC2, 2 m band, 146 MHz, Yagi Turnstile Simulation and Build This article describes a Turnstile Antenna for the 2 meter band, 146 MHz amateur satcom, 137 MHz NOAA and Russian Meteor weather satellites. Weather satellite reception is described here . A quadrifilar helical antenna is described here . Engineering, is the art of making what you need, from what you can get. Radiation Pattern of the Three Element Yagi-Uda Antenna Once one combine and cross two Yagis, the pattern becomes distinctly twisted. The right hand polarization actually becomes visible in the radiation pattern plot, which I found really cool. Radiation Pattern of Six Element Turnstile Antenna Only a true RF Geek can appreciate the twisted invisible inner beauty of a herring bone antenna... Six Element Turnstile Antenna Essentially, it is three crosses on a stick. The driven elements are broken in the middle at the drive points. The other elements can go straight throug

Aeronetworks sro - Airborne Linux

Search This Blog